Specifications

RN: 3-1
RS3: Software Release Notes for P1 R4.2
System Improvements
Section 3:
System Improvements
This section describes impr ovem ents to the RS3 system, including
corrected discrepancies.
Corrected Discrepancies
Table 3.1 lists discrepancies corrected for Release P1 R4.2.
Table 3.2 lists discrepancies corrected for Release P1 R4.1.
Table 3.3 lists discrepancies corrected for Release P1 R4.0.
Table 3.4 lists discrepancies corrected for Release P1 R3.4.
Table 3.5 lists discrepancies corrected for Release P1 R3.3.
Table 3.6 lists discrepancies corrected for Release P1 R3.2.
Table 3.7 lists discrepancies corrected in previous P1 releases
The ID column specifies the RS3 subsystem: (Batch, Controller,
Console, Comm, CP, Documentation, I/O, or SMS), followed by a
number used to track this change. T he Rating column contains a
two-character code. An A rating is most severe, a D rating is least
severe.
NOTE: While the phrasing of some descriptions may seem to indicate a
problem, all discrepancies listed have been verified and corrected.
Table 3.1. RS3 Corrected Software Discrepancies in P1, Release 4.2
ID
Description Rating
Controller
0535
The analog input values from the Multipoint Analog Input (MAI) FIM connected to
the Controller (MPC2 or MPC5) stops updating without any indication or alarm to
the operator. This WILL occur when the MPC2 or MPC5 controller (single or re-
dundant) is loaded with image software version P1.18 and connected to any MAI
FIM. The ”Hold Forward” (HF) flag, after 124.25 days of uninterrupted runtime, will
be set and prevent actual analog value from being used. See KBA #
AUS1--247--010419112733 for additional information on this issue.
Fixed
A1