Specifications
RN: 2-25
RS3: Software Release Notes for P1 R4.2
Software and Hardware Requirements
Table 2.27. CPIV+ ControlFile with MPCII and Standard Controllers
CP NV Memory Controller Image and Hardware to Support Image
Image Hardware
Boot
ROM
Size/Type
Controller Image
File Name
Controller
Image
Hardware
Boot
ROM
$CP4_18
S
t
a
n
d
a
r
d
C
P
CPIV+ 4.02 2MBNV
M
e
m
o
r
y
MPC2+
S
tandard
C
P Memory
(Requires
1
1
5
N
V
$MPC2+_18
PLC+
M
P
C
I
I
6
0
5
1.15
N
V
Boot)
MUX+
MPCII 6.05
$RBLC2_18 RBLC+
CC 5.15
CC
MPC(I)
(1)
5.15
MPCII
(2)
6.05
$
$
S
T
D
C
1
8
MLC MLC 5.15
$$STDC
_
18
SSC SSC 5.15
MUX/PLC 5.15
MUX
MPC(I)
(3)
5.15
M
P
C
I
I
(
4
)
6
0
6
MPCII
(
4
)
6.06
(1)
An MPC(I) controller jumpered to run the Contact Controller Image
(2)
An MPCII controller jumpered to run the Contact Controller Image
(3)
An MPC(I) controller jumpered to run the MUX Image
(4)
An MPCII controller jumpered to run the MUX Image
NOTES:
D
This table covers CPIV+ ControlFiles. A CPIV+ works with the MPCII or a mixture of the MPCII and standard
controllers. The CPIV works only with MPCII processors.
D
ControlFile nodes with a combination of CPIV+s, MPCII’s and standard controllers use V18 images contained in the
P1 R4.x software release. Only the combination of hardware and software listed in the above table is supported.
D
Boot ROM level X.YY is the minimum required; a higher .YY number will also work.
D
The NV boot level is listed as the BRAM field on the ControlFile Status (CFS) screen.
General Hardware Upgrade Information
D
MPC(I) controllers can only be used in the above table when they are either jumpered to run the Contact Controller or
MUX image. MPC(I) controllers running MPC(I) images are not supported in CPIV+ ControlFiles in the P1 R4.x
software release. All MPC(I) controllers running MPC(I) images must be upgraded to MPCII or MPC5 controllers.
D
Rosemount Basic Language Controller (RBLC) image is only supported with MPCII or MPC5 controllers in the P1
R4.x software release. Any MPC(I) running RBLC image must be upgraded to an MPCII or MPC5.