Specifications

RN: 2-15
RS3: Software Release Notes for P1 R4.2
Software and Hardware Requirements
Table 2.13. Typical Upgrade Scenarios (continued)
Console Upgrade Scenario
68020 SCSI Master MTCC and
One Slave Node
The slave console must be split from the master and made into a
master node. This requires a hard drive to make a disk-only console,
or a hard drive and tape drive. Kits are available to make this change.
See Console Upgrades in Section 4.
Both 68020 processor boards must be replaced with 68040 processor
boards using a 68040 upgrade kit. See 68020 to 68040 Console
Upgrade Kit in Section 4.
68020 SCSI Master MTCC and
T wo Slave Nodes
Both slave consoles must be split from the master and made into
master nodes. This requires at least a hard drive to make a disk-only
console, or a hard drive and tape drive. Kits are available to make this
change. See Console Upgrades in Section 4.
All three 68020 processor boards must be replaced with 68040
processor boards. See 68020 to 68040 Console Upgrade Kit in
Section 4.
68000 SCSI Master MTCC with
Pixel Graphics
The 68000 processor board must be replaced with a 68040 processor
board.
68000 SCSI Master MTCC and
One Slave Node with Pixel
Graphics
The slave console must be split from the master and made into a
master node. This requires at least a hard drive to make a disk-only
console, or a hard drive and tape drive. Kits are available to make this
change. See Console Upgrades in Section 4.
Both 68000 processor boards must be replaced with 68040 processor
boards.
68000 SCSI Master MTCC and
T wo Slave Nodes with Pixel
Graphics
Both slave consoles must be split from the master and made into
master nodes. This requires at least a hard drive to make a disk-only
console, or a hard drive and tape drive. Kits are available to make this
change. See Console Upgrades in Section 4.
All three 68000 processor boards must be replaced with 68040
processor boards.
68000 SCSI Master MTCC with
Character Graphics
The 68000 processor board must be replaced with a 68040 processor
board.
The character graphics video processor board must be replaced with a
pixel video processor board.
68000 SCSI Master MTCC and
One Slave Node with Character
Graphics
The slave console must be split from the master and made into a
master node. This requires at least a hard drive to make a disk-only
console, or a hard drive and tape drive. Kits are available to make this
change. See Console Upgrades in Section 4.
Both 68000 processor boards must be replaced with 68040 processor
boards.
Both character graphics video processor boards must be replaced with
a pixel video processor board.
(continued on next page)