Specifications

RN: 2-12
RS3: Software Release Notes for P1 R4.2
Software and Hardware Requirements
Table 2.9. P1 R4.x/SMS Console Boot ROM and Graphics Card Requirements
OI Processor Board
Boot ROM w/Graphics Card
10P55270011 (all revs) 1984--3204--1112 (Ver 11.12)
1984--2503--0001 or
10P58900001
10P55270011 (all revs) 1984--3204--1110 (Ver 11.10) 1984--2503--0001
NOTE: The Boot ROM level X.YY is the minimum required; a higher .YY number will also work.
Table 2.10. Hard Drive, Tape Drive, and SCSI Board Part Numbers
Description
Part Number
Hard Drives
Seagate ST34520N 4.5 Gigabyte 12P23040001
a
d
e
s
Quantum QM32100, 2.1 Gigabyte 10P58570001
Quantum Thunderbolt, 540 Meg 10P58050001
IBM DeskStar 540, 540 Meg 10P5665000x
Quantum LPS 270S, 270 Meg 10P52800002
Quantum LPS 170S, 170 Meg 1984--3500--000x
Quantum LPS 105S, 102 Meg 1984--3100--000x
Quantum Prodrive 80S, 84 Meg 1984--2780--000x
Quantum Q280, 80 Meg 1984--2307--000x
Quantum Q540, 40 Meg 1984--1928--000x
Tape Drives
Tandberg 9245 10P5685000x
a
p
e
e
s
Tandberg 5623 (superceded by 9245) 10P5685000x
Viper 2150S 1984--3389--000x
Viper 2160S 1984--3289--000x
Scorpion 5945S 1984--1989--000x
Scorpion 5945C 1984--1927--000x
SCSI Boards
SCSI Host Adapter 1984--1140--000x
S
C
S
o
a
d
s
SCSI Board 2 1984--3301--0001
Drive Notes
D For Tandberg 5623 tape drives with a beige faceplate, it is
necessary to initialize a tape every time the console is powered
up. F ailure to do so will result in unexpected tape operation
errors.
D Hard drives larger than 970 megabytes installed on an RS3
system will only have 970 m egabytes available for use on the
RS3.