Specifications

RN: 2-8
RS3: Software Release Notes for P1 R4.2
Software and Hardware Requirements
Table 2.3. Nonvolatile Memory Card Identification
Memory
Part Number Comments
4MB 1984 --2347--0041
RAM; Required with CP5 Coordinator
Processor and/or MPC5 controllers
2MB 1984 --2347--0021
RAM; Used with ABC Batch and
CPIV; (Minimum Required for P1
PeerWay Image Designation)
1MB 1984--2347--0011
RAM; Used only with CPII
1MB 1984 --1598--0001
Bubble Memory; Used only with CPII
0.5 MB
1984--1483--0001
1984--1224--000x
Bubble Memory; Used only with CPII
D Use Table 2.1 through Table 2.36 in this section to determine if
your current hardware will support P1 R4.x software.
Supervisor Computer Interface (SCI)
Use Table 2.32 in the SCI section to determine if your current
hardware will support P1 R4.x software.
Highway Interface Adapter (HIA)
Use Table 2.31 in the HIA section to determine if your current
hardware will support P1 R4.x software.
RS3 Network Interface (RNI)
D A screen pr int o f the Configur e RNI (CRN) screen.
See the RNI section to determine if your current RNI software will
work with P1 R4.x software.
RS3 Operator Station (ROS)
D The version number, displayed on the initial startup screen of the
ROS station after r eboot, or from the RS3DIAG screen.
See the ROS section to determine if your current ROS software will
work with P1 R4.x software.
RS3 VAX Interface (VAX)
D A screen print of the VAX Status (VS) screen.