Specifications

RN: 5-74
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Service Manual, Volume 2 Changes
Changes to the Service Manual (SV), Volume 2 are a result of additional
information concerning:
D FIC r edundancy
D FIM redundancy
D Loop power
D MAIO16 Termination Panel
D Introduction of a new MAI32 F IM with the P1 R3.4 release
D Changing a detail screen name from “F IC Detail” to “Field I/O
Detail”
D Analog FIM bits
The following information describes the changes to this manual.
SV: Chapter 5 (Serial and Analog I/O)
SV-5: Section 1 (Analog Card Cage)
Description: The first paragraph on page 5-1-29 was changed to clarify
the information on FIC redundancy.
When a primary FIC with redundancy fails, the redundant FIC takes
over. T he failed FIC lights its red LED or flashes its green LED. Replace
the failed FIC and determine that the new FIC has its green LED on and
that the F ield I/O Status screen (previously the F IC Status screen)
shows no error for the FIC. The “Health” field of the primary FIC will still
show “Bad”.