Specifications

RN: 5-72
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Description: The definitions of “kill” on page G-16 wer e modified to
read as follows.
kill 1) To delete the controller configuration.
2) To stop and end a batch task or recipe.
Service Manual, Volume 1 Changes
Changes to the Service Manual (SV), Volume 1 are a result of additional
information concerning:
D The SCSI card boot ROM
D Using the Coordinator Processor enable/disable switch
D The MPC5 I/O communication baud rate
The following information describes the changes to this manual.
SV: Chapter 3 (Consoles)
SV-3: Section 7 (OI Card Cage)
Description: Changes to Table 3.7.19 on page 3-7-10 were
incorporated to clarify information on the boot ROM version of SCSI
card 1984--3301--000x.
Table 3.7.19. SCSI Card Parts Replacement
Part Number
Replaces Characteristics
1984--3301--000x
1984--1140--0001
NOTE: You cannot mix --3301
and --1140 boards in a Multitube
console.
Requires OI 68040 Processor with a
minimum boot ROM of 10.08.
NOTE: See the Software Release Notes for
the current boot ROM to be used with your
version of software.
1984--1140--0004 1984 --1140--0001
Cannot be used with a --3301 board in a
Multitube console.
1984--1140--0001 Itself only
Cannot be used with a --3301 board in a
Multitube console.
Description: The part number for the new graphics card was added to
the first sentence on page 3-7-39.