Specifications

RN: 5-66
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Description: The following note was added under the first bullet under
this topic (page 9-5-9).
Jumpers on Controller Board
NOTE: MPC5’s do not have jumpers HD21 through HD24.
Description: A change was m ade to the second paragraph with a bullet
under this topic (page 9-5-9) and the reference to the Service Manual
was corrected.
Jumpers on FICs
D Jumpers HD2A and HD2B should be in the T ERM (Terminal)
position when one of the cables described on page 9-5-7 is used
or for any other cable which swaps pins 2 and 3. Jumpers HD2A
and HD2B should be in the MOD (Modem) position for any cable
which does not swap pins 2 and 3.
For additional FIC jumper information, see SV: 5-1.
Description: A change was m ade to the “Enter” column under the first
paragraph under this topic ( page 9-5-13).
PLC-2 Example
Field Enter . . .
PLC Number 29 (decimal equivalent of 35 octal)