Specifications

RN: 5-63
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
I/O BLOCK CONFIGURATION 06-Aug-98 09:40:30
Address =1G005 Device Type PLCB
Block Tag ⇒ Block Type ⇒PLCB Mode →AUTO
Auto Lock ⇒no
Source ⇒ PLCMux/E
Addr 1G-01/E Data Type ⇒S int PLC write Mask ⇒FFFFx
Value From Source 0. Sample Time ⇒1 S Value to PLC 0000x
Write ⇒filter Sim
Tag⇒ Port ⇒ A PLC number ⇒1
Addr
Read →no PLC Word Address ⇒040005
Hardware Alarm Code 0 Plant Unit ⇒ 0 Alarm Priority ⇒ 0
Figure 9.3.11B. Controlled PLC Register Write
Description: Changes to Table 9.3.11 are a result of additional data
type fields and Figure 9.3.12 was modified under this topic (page
9-3-24).
Configuring an I/O Block to Write a PLC Register Address
Table9.3.11DataTypes
Field
Description Value from Source
S INT and
SINT
Scale
Will accept an integer between --32768 and 32767 as an
analog value.
Block Output (Q)
U INT and
UINT
Scale
Will accept an integer between 0 and 65535 as an analog
value.
Block Output (Q)
BCD3 and
BCD3
Scale
Will accept an integer between 0 and 999 as an analog
value.
Block Output (Q)
BCD4 and
BCD4
Scale
Will accept an integer between 0 and 9999 as an analog
value.
Block Output (Q)