Specifications

RN: 5-27
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Description: The first paragraph on page 3-4-3 was modified to include
the MPC5 Contro ller Processor.
Forty links are available for each MPC Controller Processor. Eighty links
are available into and out of each MPCII or MPC5 Controller Processor.
The ControlFile Status screen displays the number of remaining links
for Controller Processors. F or information about the ControlFile Status
screen, see “ Viewing the Number of ControlFile Links Available” later in
this section.
Description: Table 3.4.2 was modified to include information of the
MPC5 Controller Processor (page 3-4-15).
Table 3.4.2. ControlFile Status Screen Fields
Field
Acces
s
Level
Description
Allowable
Entries
Jumper Code Conf
Indicates the MPC functionality and the image
selection for which the jumpers are configured when
using an MPCII.
Displayed in the format x_y_z, where:
x = 0 for 12 MHz MPC functionality, or
1 for 16 MHz MPC functionality
y = 0--7 for the Image Select jumpers
(HD6 -- HD8)
z = 0--7 for the MPC2 or MPC5 Sub-image
Select jumpers (HD4, HD5, and HD9)
For more information about jumpers, see SV: 4.
Display only
CB: Chapter 6 (Logic Steps)
CB-6: Section 4 (Logic Statement Functions)
Description: The following note was added after the first paragraph on
page 6-4-30.
NOTE: T he inhibit function does not work on MPC I controllers.