Specifications

RN: 5-26
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Table 2.2.5. P, I, and D Configuration Fields on Continuous Faceplate Screen
Field
Access
Level
Description Allowable Entries
Prop Band
(or Cont Gain)
Supr
Proportional Band or Controller Gain. The field that
appears depends on the “PID Proportional” field on
the Console Configuration screen. (See CC: 1.)
(Prop Band of 100) = (Controller Gain of 1)
Appears when you configure proportional control or a
combination that includes proportional control.
PV, LS, RS, FF, E
to O,
.000001 to 999999
Default=100.
(Band) 1. (Gain)
CB-2: Section 3 (Configuring Other ControlBlock
Continuous Functions)
Description: The values for the TOT function input and output registers
on page 2-3-51 were changed to read as follows.
The Stack Totalizer (TOT) function is an integrator with an output that
resets to zero when it reaches a high limit or a r eset indication. The
TOT function input and output registers contain the following values:
D A input register Current PV value
D Q input register Current accumulated total
D B output register Previous Q value
D C input register Previous B value
D D output register Previous C value
CB: Chapter 3 (Configuring Block Links)
CB-3: Section 4 (Configuration Constraints)
Description: Table 3.4.1 was modified to include information of the
MPC5 Controller Processor (page 3-4-1).
Table 3.4.1. Links Available for Components
Component
Number of
Available Links
MPC5 Controller Processor:
Within Controller Processor
Into and out of Controller Processor
Unlimited
80