Specifications

RN: 5-23
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Configuration Quick Reference Guide Changes
Changes to the Configuration Quick Reference Guide (CQ) reflect the
changes documented in the Console Configuration m anual that are a
result of:
D Addition of automatic backup capability released with P1 R1.2
D Release of the MPC5 Controller Processor released with P1 R3.0
The following information describes the changes to this manual.
CQ: Chapter 1 (Screens/Operator Interface)
Description: The following information was added to the items listed
under “Trend File Configuration Screen ( TFC )” on page 1-37.
D Tr end file 0 is a trend file in RAM only. It is not saved on disk.
With trend file 0, there is no control over time duration; frequency
(60 data bits) controls duration. F or example, if the frequency is
every m inute, the duration is one hour. Your sample rate is 60.
CQ: Chapter 2 (ControlBlocks)
Description: The G input on page 2-44 was corrected to read as
follows.
G Close timer counts time between output of a Close command
(step b) and Confirm Close (@h ).
CQ: Chapter 5 (MTCC Commands)
MTCC Commands that Call Up Screens,
Alphabetical List of MTCC Screen Callup Commands,
MTCC Commands that Perform Operations, and
Alphabetical List of MTCC Operation Commands
Description: Update these tables to include the new command line
entries for the automatic backup functions (refer to the changes for the
Console Configuration Manual, Chapter 8, Section 3).
CQ: Chapter 6 (SMS Commands)
Description: The paragraphs under “Using SMS Commands” on page
6-2 were changed to read as follows.