Specifications

RN: 5-17
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
-
To edit link addresses:
Step DescriptionOperation
8 Action:
Cursor to the “Press <ENTER>” field and press [ENTER] to execute the mode
specified in the “Edit Mode” field.
Comments:
The operation is complete when the following message appears:
File is updated with new Address
If you have performed a Modify operation, the “Unmodified Addresses” box
shows only the addresses that were not modified. The modified addresss will
appear on the list again after you do a List operation.
Note: When modifying the file, the Edit operation will not do anything if the file
does not contain any addresses that fall in the specified Address Range. The
following message is displayed:
No update: Address is out of range
CC: Chapter 4 (Reports)
Section 4 (Configuring a Report)
Description: the description of the “Active ?” field was changed to
include information on reports configured to print based on time (page
4-4-3).
Table 4.4.1. Report Configuration Screen Fields
Field
Description Allowable Entries
Active ?
Determines whether or not the “Generate on alarm/event
from” field is active. It also determines whether or not a
report is configured to print based on time.
yes,
no
Description: Figure 4.4.19 was modified to include a current screen
display (page 4-4-25).