Specifications

RN: 5-16
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
Procedure: Editing Lin k Add resses
-
To edit link addresses:
Step
Operation Description
1 Action:
Call up the Link Editor screen. Type:
LE
2 Action:
Select the operation in the “Operation” field. Scroll through the available
operations with the [NEXT OPTION] key. The operations are
Edit TREND File
Edit TREND Display
Edit Graphic Display
Edit Report Program
Edit GROUP Display
Comments:
The operation selected determines which folder appears in the “Source File” field
(either the Process Graphics, Console Config, or Report Config folder). It also
determines whether a “Group Range” or “Trend File” field appears on the screen.
3 Action:
Enter the name of a file in the “File Name” field or press [NEXT OPTION] to
choose a file from the available filenames in the folder.
-
To edit link addresses:
Step
Operation Description
Comments:
To call up the file, press [SELECT] on the “File Name” field.
4 Action:
Comments:
Enter the current link address range for the file in the “Address Range” field.
The address range consists of the PeerWay node and controller processor card
numbers. Use the format:
=1A (where 1 is the PeerWay node and A is the controller processor card.)
The address range must match the actual address range used by the file.
5 Action:
Comments:
Enter the new link address range for the file in the “New Address” field.
The address range consists of the PeerWay node and controller processor card
numbers. Use the format:
=1B (where 1 is the PeerWay node and B is the controller processor card.)
Note: All addresses that fall inside the source Address Range will be modified by
the addition of an offset that corresponds to the difference between the New
Address base address and the source Address Range base address.
6 Action:
In the “Edit Mode” field select either “List or Modify”. Press the [NEXT OPTION]
key to toggle between the two modes.
Modify Changes the address of the “Address Range” field as specified in the
“New Address” field.
List List the block links used in the configuration in the “Unmodified
Addresses” window on the right.
7 Action:
If you selected “Edit GROUP Display” or “Edit TREND Display” as the operation,
enter a range the “Group Range” field. If you selected “Edit TREND File” as the
operation, enter a range in the “Trend File” field. “All” is the default range.