Specifications

RN: 5-15
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
LINK EDITOR 07-Nov-97 14:35:19
Console Node 68
Disk Name WINI
At Node 60 On Drive 1
File Name ⇒ ABC14 Console Config
Address Range ⇒=7E-60,=7E-80
New Address ⇒=91A-60
Operation ⇒Edit GROUP Display
Edit Mode ⇒ List
Group Range ⇒ All
⇒ Press <ENTER> to Execute
Unmodified Addresses
TRIANGLE:=7E-60/c
BOX:,=7E-61
TAG:,=7E-60
TAG:,=7E-61
TAG:,=7E-62
TAG:,=7E-63
TAG:,=7E-64
TAG:,=7E-65
LINK:,=7E-60
LINK:,=7E-61
LINK:,=7E-62
LINK:,=7E-63
LINK:,=7E-64
LINK:,=7E-65
DISC:,=7E-60
DISC:,=7E-61
Page 1 *More*
File Name. Name of the file used to
modify block link references.
Address Range. Current address range of
links to be edited or listed. You can specify a
range by PeerWay node and controller
processor card numbers.
New Address. New address range of links
after editing. You can specify a range by
PeerWay node and controller processor card
numbers.
Operation. Use Next Option and press [SELECT] to
choose the operation:
Edit TREND Display
Edit Graphic Display
Edit Report Program
Edit GROUP Display
Edit TREND File
Modified addresses reappear in this
window when you do a “List” after a
“Modify”.
Edit Mode. The Link Editor has two modes:
Modify Changes the address of the “Address
Range” field as specified in the “New
Address” field.
List Display the block links used in the
configuration in the “Unmodified
Addresses” window on the right.
Group Range or Trend File. This
field is displayed if you have selected
“Edit GROUP Display”, “Edit TREND
Display”, or “Edit TREND File” as the
operation. The field defaults to “All”; you
can change it to a range.
At Node. You cannot change to a
different node using this screen.
Figure 2.7.1 Link Editor Screen