Specifications

RN: 5-8
RS3: Software Release Notes for P1 R4.2
Changes to RS3 Manuals
CONSOLE CONFIGURATION 22-Oct-97 09:45:27
Keyboard Nodes>0 >0 >0 Tag Mask XXXXXXXXXXXXXXXX
Use Tag Mask >no Tag Row Break >0
Keyboard Revisions >INITIALIZE TAG MASK
KBI 1.4 Change Tag Size >yes Old >8 New >16
TB 1.4 TAG OBJECTS CONFIGURED IN PROCESS GRAPHICS
DISPPNL AND IN REPORTS FILES MAY BE CHANGED IN SIZE
OPTPNL1 Tape Drive Type: RS3*T1 45S (qic-24)
OPTPNL2
OPTPNL3
Backup Disks
Overlay Backup Node >None Volume > In Use>no
General Backup Node >None Volume > In Use>no
Automatic Backup Management
Plant Config:>Disable Backup File $$BACKUP Event Type>0
Console Config:>Disable Destination File> Event Type>0
Field Refresh>0.5 secs Screen Refresh>1.0 secs Advance Requests >3
09:31:00 :=91H-05/FF 30:0000 PDHPIDLS CL U
-
To access other screens:
D [PAGE AHEAD] to see Page 3 of the
Console Configuration Screen.
D [PAGE BACK] to see Page 1 of the Console
Configuration Screen.
Figure 2.1.7 Console Configuration Screen—Page 2
CC-2: Section 1, Table 2.1.2 (Console Configuration
Screen Fields)
Description: Add information regarding the new and modified Console
Configuration screen fields.
Field Description
Automatic Backup
Management
Displays the options for automatic backup of the plant configuration
and console configuration.
Change Tag Size
Old and New
Determines whether tag objects should change size in process
graphics and reports. This feature is useful when upgrading from an
earlier version console software. For more information on changing tag
size, see the Software Upgrade Procedure.
Note that the “Old” and “New” fields appear only if the value of
“Change Tag Size” is “yes”. Also, the two lines immediately below this
field stating that “TAG OBJECTS CONFIGURED IN PROCESS
GRAPHICS AND IN REPORTS FILES MAY BE CHANGED IN SIZE”
only appear if Change Tag Size is set to yes.