Setup guide

Maxtor Fusion – Setup Guide
Maxtor Fusion Power/Status LED Definitions
BBaacckk PPaanneell LLEEDDss
FFrroonntt PPaanneell LLEEDDss
Power Button
LED Definition Status
Power LED
(located in center of
the power button)
Power Switch Illuminated - Power On
Not Illuminated - Power Off
Ethernet LED
(located in bottom side
of Ethernet connector)
Shows if the Maxtor Fusion is connected
through a 10/100 or a 1 Gb Ethernet
connection.
GGrreeeenn
- 10/100 Mbps Ethernet connectivity
AAmmbbeerr
- 1 Gb Ethernet connectivity
Illuminated - Power On
Blinking - Network communication is
occurring
Not Illuminated - Power Off
Activity LED
(located in top side of
Ethernet connector)
A flashing Activity LED indicates that the
network connection is functional and that
packets are being transmitted and received.
LED Definition Status
Top Power Activity Illuminated - Power On
Blinking - Maxtor Fusion is either powering
up or shutting down
Not Illuminated - Power Off
Center Hard Disk Activity Illuminated - Power On
Blinking - Data is being transferred to/from
the Maxtor Fusion
Not Illuminated - Power Off
Bottom Network Activity Illuminated - Power On
Blinking - Network communication is
occurring
Not Illuminated - Power Off
Activity LED
Ethernet LED
Power Activity
Hard Disk Activity
Network Activity
NNoottee::
Refer to the Maxtor Fusion Users Guide for more information on LED definitions and status.
BBAACCKK PPAANNEELL FFRROONNTT PPAANNEELL