Lyve Mobile Mount and PCIe Adapter Us e r Manual Model: Click here to access an up-to-date online version of this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.
Cont ent s 1 Setup . . . . . . Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 ....... . . . . .Management . . . . . . . . . . . .Portal . . . . . credentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. . . . . . . . . Lyve . . . . . . . . . .
Setup Requirements Lyve Management Portal creden als A Lyve Management Portal username and password are required to authorize computers to access devices connected to the PCIe Adapter. Account manager—You created a Lyve Management Portal username and password when you set up your Lyve account at lyve.seagate.com. Product admin or product user—You were identified as a product user for a project created in the Lyve Management Portal.
devices even without an internet connection. After 30 days, you’ll need to open Lyve Client on the computer and re-enter your credentials. Lyve Mobile Array locks when powered off, ejected or unplugged from the host computer, or if the host computer goes to sleep. Use Lyve Client to unlock Lyve Mobile Array when it is reconnected to the host or the host has awakened from sleep. Note that Lyve Client must be open and the user must be signed in to use Lyve Mobile Array.
Install Lyve Mobile Mount Before installing Lyve Mobile PCIe Adapter, ensure that Lyve Mobile Mount is securely fixed to a vehicle, apparatus, or structure to avoid excessive motion. To avoid damaging Lyve Mobile Array’s enclosure, the cylindrical socket cap on the mounting screws cannot exceed 8mm in height.
Install and Connect PCIe Adapter Step 1 - Insert adapter Slide Lyve Mobile PCIe Adapter onto the guide pins at the back of Lyve Mobile Mount. (Back view) Step 2 - A ach shoulder screw Insert the shoulder screw into the hole and tighten it.
Step 3 - Connect power A Snap the locking bracket onto the power cable. B Insert the power cable into the PCIe Adapter's power port. C Confirm that the power cable is well connected. D Slide the locking bracket forward and clip it on the beveled rim on PCIe Adapter.
Step 4 - Connect cables Connect the Ethernet cable (device configuration) and dual SFF-8644 cable (data) to PCIe Adapter.* *Ethernet cable not included.
Connect Lyve Mobile Array Step 1 - Release handle Press the green release button and pull the handle down. Step 2 - Insert device Insert Lyve Mobile Array with ports facing PCIe Adapter. Slide Mobile Array toward the back of the mount. Apply firm pressure until Mobile Array is seated on PCIe Adapter. Step 3 - Lock device in place Raise the handle and lock it in place.
Step 4 - Unlock the device The LED on the device inserted in Lyve Mobile Mount blinks white during the boot process and turns solid orange. The solid orange LED color indicates the device is ready to be unlocked. Make sure the Lyve Client app is running on the host computer. The host computer will automatically unlock the device if it connected to it in the past and is still authorized for security.
Regulatory Compliance Product Name Seagate Lyve Mobile PCIe Adapter Regulatory Model Number SMDG001 FCC DECLARATION OF CONFORMANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, we determined this product’s Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014.
