User Manual

Unlock the device
The LED on the device blinks white during the boot process and turns solid orange. The solid orange LED
color indicates the device is ready to be unlocked.
Once the device has been unlocked by a valid Lyve Portal Identity or Lyve Token file, the LED on the device
turns solid green. The device is unlocked and ready for use.
Power buon
Power on—A direct connection to a computer is not required to power on Lyve Mobile Array. It
automatically powers on when connected to a power outlet.
Power off—Before powering off Lyve Mobile Array, make certain to safely eject its volumes from the host
If you are using a USB host and the Lyve Mobile Array status LED is illuminated red, make sure
the cable is connected to Lyve Mobile Array's Thunderbolt 3/USB-C host port. The host port is
the USB-C port with the computer icon. A red status LED indicates that the computer is
connected to the peripheral port.

12Lyve Mo bile Array
11/9/22