User Manual

Cables Host port
Thunderbolt 3 Thunderbolt 3, Thunderbolt 4
USB-C to USB-C USB 3.1 Gen 1 or higher
USB-C to USB-A USB 3.0 or higher
Connect Lyve Mobile Array to a computer in the following order:
A. Connect the Thunderbolt 3 cable to Lyve Mobile Array's Thunderbolt 3 host port located on the left side
of the back panel.
B. Connect the other end to an appropriate port on the host computer.
Windows Prompt: Approve Thunderbolt Device
When you first connect Lyve Mobile Array to a Windows PC that supports Thunderbolt 3, you
may see a prompt requesting to authenticate the recently connected device. Follow the
onscreen prompts to approve the Thunderbolt connection to Lyve Mobile Array. For more
details on Thunderbolt connectivity to your Windows PC, see the following
knowledge base
article
.

11Lyve Mo bile Array
11/9/22