Product manual

42 Product Manual - Hawk 2 Family (Wide bus) SCSI-2 (Volume 1), Rev. A
_____________________________________________________________________________________
11.2 SCSI interface messages supported
Table 11.2-1 following lists the messages supported by the SCSI-1, SCSI-2 and SCSI-3 modes of the ST12400
Wide Family drives.
Table 11.2-1. SCSI messages supported by ST12400 wide family drives
Msg Supported by:
Code SCSI-1 SCSI-2/SCSI-3 Message Name
01h [1] Y Y Extended messages
06h Y Y Abort
12h N Y Continue I/O process
13h N Y Target transfer disable
0Dh Y Y Abort tag
0Ch Y Y Bus device reset
0Eh N Y Clear queue
00h Y Y Command complete
04h Y Y Disconnect
80h-FFh Y Y Identify
23h N N Ignore wide residue (two bytes)
0Fh N N Initiate recovery
05h Y Y Initiator detected error
0Ah N N Linked command complete [2]
0Bh N N Linked command complete with flag [2]
09h Y Y Message parity error
07h Y Y Message reject
[1] N N Modify data pointer
08h Y Y No operation
Queue tag messages (two bytes)
21h Y Y Head of queue tag
22h Y Y Ordered queue tag
20h Y Y Simple queue tag
10h Y N Release recovery
03h Y Y Restore pointers
02h Y Y Save data pointer
[1] Y Y Synchronous data transfer req.
11h N N Terminate I/O process
[1] N Y Wide data transfer request
[1] Extended messages (see P/N 77738479 SCSI-2/SCSI-3 Interface Product Manual).
[2] Customer Unique