User`s manual

261
Parameter
Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Motion
tour/Alarm
tour
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
Figure 5-95
Please refer to the following sheet for detailed information.
5.8.5.4 Alarm Out
The alarm output interface is shown as below. See Figure 5-96
Here you can set alarm output mode: auto/manual/stop.