User`s manual

110
Parameter Function
Parity
There are five options: none/odd/even/space/mark.
System default setup is:
z Function: Console.
z Data bit: 8
z Stop bit: 1
z Baud bit: 115200
z Parity: None.
5.3.2.5 Network
Network interface is shown as in X462H462H462HFigure 5-36.
Figure 5-36
Please refer to the following sheet for detailed information.
Parameter Function
Network Mode Includes multiple access, fault tolerance, and load balancing
Default Network
Card
Please select eth0/eth1/bond0(optional) after enable multiple
access function
Ethernet Please select eth0/eth1(optional).after enable multiple access
function.
TCP Port Default value is 37777.
HTTP Port Default value is 554.
UDP Port Default value is 37778.
Max Connection Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
z
Advanced
The advanced interface is shown as in Figure 5-37.