User`s manual

109
Parameter Function
Holiday Click Set button, system pops up a dialogue box shown as in Figure
5-33.
Here you can set holiday date. Check the box, it means current chan
n
shall record as your holiday setup. Please go to the Period interface t
o
set the holiday date record setup.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in Figure
5-34.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
5.3.2.4 RS232
The RS232 interface is shown as in Figure 5-35.
Figure 5-35
Please refer to the following sheet for detailed information.
Parameter Function
RS232 There are two options: COM 01 and keyboard.
Console is to upgrade the program or debug via COM or
mini terminal software.
Function
Keyboard: COM control protocol. You can use keyboard to
control NVR via COM.
Data Bit
The value ranges from 5 to 8.
Stop Bit
There are three options: 1/2.
Baud Bit You can select corresponding baud bit here.