Product manual

74 Cheetah NS 10K.2 FC Product Manual, Rev. D
characteristics 66
LED driver 67
single-unit shipping pack kit 9
SMART 8, 16
SMP=1inModeSelect command 58
SO 44, 47
spindle brake 7
Stacked connection req. 44, 47
standards 3
Start unit/stop unit command 50
start/stop time 11
Supported diagnostics pages command 50
surface stiffness
allowable for non-flat surface 41
switches 40
Synchronize cache command 50
synchronized spindle
operation 58
system chassis 41
T
target reset function 43
task management functions 43
Abort task set 43
Clear ACA 43
Clear task set 43
Target reset 43
terminate task 43
task management response codes 43
Function complete 00 43
Function not supported 05 43
Function reject 04 43
task set full status 58
temperature 30, 40
limits 30
non-operating 30
regulation 3
See also cooling
terminate task function 43
terminators 40
Test unit ready command 49
Third-party Process Logout (TRPLO) 42
tracks per inch 10
Translate page command 50
transmit eye diagram 67
transmitters 61
transporting the drive 20
TTL input characteristics 66
U
UI 45, 46
unformatted 8
unique identifier 45, 46
Unit attention page (00h) command 49
Unit serial number page command 49
Unrecoverable Errors 14
unrecovered media data 14
V
Valid version level 44, 47
Verify command 50
Verify error recovery page (07h) command 49
vibration 31, 33
Vital product data page command 49
W
warranty 20
word sync 15
Write and verify command 50
Write buffer command 51
Write combined header and data mode (0) 51
Write command 49
Write data mode (2) 51
Write extended command 50
Write long command 51
Write same command 51
X
XD read 52
XD write 52
XD write extended command 52
XID reassign 44
XP write 52
Z
zero latency read 58
zone bit recording (ZBR) 7