User`s manual

ARS-2017E Manual

from the OS on HDD B according to the above steps, or the OS is other than Win-

dows like Linux or Mac, etc., try the third method.

3. Install a new IDE HDD (No. C newly purchased or fine) and a new OS (such

as Windows XP) into Mirror Smart

Step 1. Take two empty trays out of Mirror Smart.

Step 2. Put HDD C and HDD D into the trays, install them and replace to Mirror

Smart separately.

Step 3. Boot Mirror Smart and computer. Be sure that Mirror Smart’s hard drive

power LED is normal (stable green light).

Step 4. After booting, if everything is right and the two hard drives are equal in

capacity, Mirror Smart will regard the hard drive on the upper tray as the

source and that on the lower tray as the destination, and begin to syn-

chronize.

Step 5. Enter BIOS to set the priorities of booting from CD-ROM and SCSI hard

drive to the first and second. Exit after saving the setting.

Step 6. Put the CD containing OS installation into CD-ROM and boot hence. Before

installing the OS, install the driver of SCSI card first if necessary.

Step 7. After installing the OS, install the Mirror Smart Utility to monitor the whole

mirror.

NOTICE: In a set of Mirror Smart you are suggested to use two hard drives

of the same brand and model. If you replace a failed hard drive with a new

one, the new hard drive should be larger or equal to the original one.