User`s manual

26
ARS-2017E Manual
The DIP switch setting gives a unique SCSI ID number to the Mirror Smart 160. The
figure shows the DIP switch of ARS-2017E.
Figure 4-8
1 2 3 4 5 6 7 8
ON
Please follow the instructions below to set DIP switch properly.
Give a unique SCSI ID number to each ARS-2017E in a daisy chain according to
the following figure. Even if there is only one ARS-2017E, you still need to give it an
ID number.
1 èON-SCSI ID 1
2 èON-SCSI ID 2
3 èON-SCSI ID 4
4 èON-SCSI ID 8
5 èReserve
6 èReserve
7 èReserve
8 èReserve
ON
OFF
Default: All OFF (ID=0)
è
è
1 2 3 4 5 6 7 8
ON
Figure 4-9
For the illustration of SCSI ID number in ARS-2017E, please see Figure 4-10 on
the next page.
4.3 DIP Switch Setting