User`s manual

ARS-2017E Manual

Press here to lock

Attention :

l After installing the hard drives onto the trays, return the trays to their

original position, and push the handles to “Lock” so that the system won’t

act wrongly.

l During normal operation, if the system detects a failed hard drive, Alarm

LED A3 or B3 will blink 10 seconds. Then, it will keep lighting with handle

ejected. It shows that the failed drive needs to be examined or replaced.

l After a new drive is installed and plugged, the system will examine the

new drive. Now, LED A1, B1 and C1 will keep lighting. Alarm LED A3 or

B3 will blink to show that the new hard drive is being examined.

l When the new hard drive is ready, LED A1, B1 and C1 will keep lighting,

and Alarm LED A3 or B3 will keep blinking. Yet, LED A2, B2 and C2 will light

to show that the system is rebuilding data to the new hard drive.

l The beep of warning is different according to different condition. When there

is a problem happening, please judge and solve the problem in accordance

with the following table.