User`s manual

18
ARS-2017E Manual
The table below explains ARS-2017E’s 5 LEDs and an alarm-off resetting button.
5.LOAD DEFAULT : recover the defaults
Once the defaults are restored, your all settings, including the password will be
deleted.
The explanations of characters and icons:
(1) Ch0 : the upper hard drive
(2) Ch1 : the lower hard drive
(3) R/W : the hard drive’s reading/writing status
(4) W : the hard drive’s writing status
(5) S : during the scanning of hard drive
(6) : temperature
(7) : fan
(8) RB0>1 : data are being rebuilt from disk0 to disk1
(9) RB0<1 : data are being rebuilt from disk1 to disk0
(10) CP0>1 : compare the 2 hard drives’ data by taking disk0 as primary
(11) CP1<1 : compare the 2 hard drives’ data by taking disk1 as primary
3.3 Mirror Smart’s LEDs
No LED Explanation
A1, B1 Hard drive power LED
Its stable green light means normal power
supply.
A2, B2 Hard drive access LED Its light means busy reading/writing
A3, B3
Hard drive error or
malfunction LED
It blinks when the data is being rebuilt, the track
fails, the fan is abnormal, or the temperature is
too high.
C1 System power LED
Its stable green light means normal power
supply.
C2 Rebuilding LED It lights when the data is being rebuilt.
C3 Alarm-off resetting button It can be pushed to stop the buzzing completely.