User`s manual

17
ARS-2017E Manual
3.3 Scan disk0 : scan the upper hard drive
It is to scan if the the upper hard drive is all right. During the scanning,
the system will ask if you want to continue scanning when it detects a failed
track in the hard drive. Once this function is activated, the menu will
change to “Stop scan disk0” automatically so that the system manager can
stop scanning.
3.4 Scan disk1 : scan the lower hard drive
It is to scan if the lower hard drive is all right. During the scanning, the
system will ask if you want to continue scanning when it detects a failed
track in the hard drive. Once this function is activated, the menu will change
to “Stop scan disk1” automatically so that the system manager can stop
scanning.
3.5 Unlock disk0 : eject the upper hard drive
3.6 Unlock disk1 : eject the lower hard drive
3.7 Password : the setting of a password
3.7.1 Enable password : enable the protection of a password
Once you activates the protection of a password, the system will ask
you to key in the password.
3.7.2 Set password : set a new password
Key in the old password, then key in a new password, and confirm the
new password once again to finish the change. If you don’t activate the
protection of a password, the menu will be hidden.
3.8 Advanced status : the status of advancement
It is to display the scanning or rebuilding or comparing progress. The
progress will be displayed in standby mode, too. If there is no task
progressing in the system, the menu will be hidden.
4.EVENT LOG : the recording of events
Press ▲ or ▼ to change the option. Press ENT to confirm your option.
4.1 Display log : display all records (record limit is 100)
4.2 Erase log : erase all records
4.3 Elapse time : display all the time from system start to the present
If the system hasn’t been restarted over 3 years, the counting will be
from the beginning again.