User`s manual

ARS-2017E Manual

Chapter 3 The Control Panel

3.1 LCD Panel

There are 4 buttons on the LCD panel of ARS-2017E.

▲ : to scroll up the functions or menus.

▼ : to scroll down the functions or menus.

ENT : to confirm a setting and enter the selected function.

ESC : to cancel a setting and return to the previous layer of functions. Pressing ESC

for more than 2 seconds will let the system return to standby mode.

3.2 LCD Operation

Besides the connection with PC via a SCSI cable, ARS-2017E is an independent

system, too. After pressing the switch on the back of ARS-2017E for seconds, you

can turn on the Mirror Smart. In the standby mode, LCD will display the information

of ARS-2017E such as capacity, status, temperature, fan speed, etc. by turns. Press

ENT or ESC to operate. ARS-2017E is shipped without setting a password, but you

can set one under “SETUP” menu. If you have set a password, key in the correct

password to enter.

There are 5 major function menus in ARS-2017E as the following structure figures

show. Each menu has submenus. Before operation, it is suggested to read through

for understanding.