User`s guide

Troubleshooting
37
4.9.2.2 Inserting the Module
Install the module by sliding into the correct bay (1/1 at front or 3/1 at rear) ensuring the module has docked with
the connector and the retention clip has engaged with the chassis. (Figure 4–5)
Caution TheESI/Ops panel module variants are not interchangeable, a front mountied module cannote be
installed in the rear mounting position and vice versa.
4.10 List of Spare Parts and Ancillary Items
The following replaceable parts are available for the SS-1200-FCAL subsystem:
• Chassis (including Backplane)
• 19 inch rack mounting rail kit
• AC Power Supply/Cooling Module
• ESI/Ops Panel module (Front facing or Rear facing)
• Drive Carrier Module
• Front dummy fascia plates
• I/O Module
• Blank plates (1x1, 1x2 or 1x3)
• External FC-AL Signal Cables:
• (Country specific) power cords
• Tri-furcated power cords
• Keys for ESI/Ops Panel and Drive Carrier modules.
• All documentation
Figure 4–5 Installing an ESI/OpsPanel Module (Rear Mounting)