User`s guide

Getting Started
21
2.3.5.4 ESI/Ops Panel Installation Procedure
Caution Check that the Ops panel keys are included with the module. If they cannot be accounted for they may
have been discarded with the packaging.
Install the module by sliding into the correct Bay (1/1 at front or 3/1 at rear, refer to Table 2–1) ensuring the module
has docked with the connector and the retention clip has engaged with the chassis.
Figure 2–9 ESI/Ops Panel: Front Installation
Figure 2–10 Installing the ESI/Ops Panel (Rear Mounting)