User`s guide

Introduction
9
1.3.8 Anti-tamper Locks
Anti-tamper locks may be fitted in the drive carrier handles (Figure 1–13) and are accessed through the hole in the
lower part of the handle trim piece.These are provided to disable the normal “Push/Push” latch action of the handle.
1.4 SS-1200-FCAL Technical Specification
1.4.1 Dimensions
Rack Enclosure
Height 177mm, Width 446mm, Depth 586mm
Tower Enclosure
Height 570mm (including wheels), Width 265mm (at base) 183mm (at top), Depth 592mm
1.4.2 Weight
1.4.3 Power
Figure 1–13 Anti-tamper Lock
Indicator Aperture
To lock turn 90º
anti-clockwise
Maximum Configuration 45 kg
Empty Enclosure (Rack) 13 kg
Tower Conversion Kit 12 kg
PSU/Cooling Module 4 kg
Voltage Range 100 - 120 or 200 - 240 VAC (switched)
Frequency 47-63 Hz