User`s manual

8
ARS-3020 User’s Manual
2.1 The Signal LEDs
The signal LEDs of ARS-3020 is as figure 2-2 shows. Besides the power singal LED,
there are 8 LEDs on the front panel of ARS-3020. Every 2 LEDs indicate the status of
a hard drive.
Figure 2-1
Figure 2-2
Chapter 2 Installation
This chapter contains 6 parts: The Signal LEDs, Set the SCSI ID, Set the Mode,
Install the Hard Drives, Connect the SCSI port, and Replace the Hard Drive.
Power
Switch
1 2 3 4 5 6 7 8 9
NOTICE Make sure to power off the system during installation or
changing any configuration.