User`s manual

10
ARS-3020 User’s Manual
Figure 2-3
2.3 Set the Mode
On the rear panel of ARS-3020 there is a 4-pin DIP switch as figure 2-3 shows. By the
switch the configuration of ARS-3020 can be set. Refer to table 2-2 for setting the
mode. Defaults of all the 4 pins are OFF.
SCSI ID Switch
DIP Switch
SCSI Port
edoM etaRrefsnarT 1niP 2niP 3niP 4niP
DOBJ
ces/BM061FFOFFOFFONO
ces/BM08FFOFFOFFOFFO
ces/BM04FFOFFONOFFO
lamroN
ces/BM061FFONOFFONO
ces/BM08FFONOFFOFFO
ces/BM04FFONONOFFO
Table 2-2
1 2 3 4
OFF (Defaults are all OFF)
ON
Pin #