Seagate® BarraCuda® 510 SSD Installation Guide 100850349, Rev.
Document Revision History Date Change February 2019 Initial Release © 2019 Seagate Technology LLC. All rights reserved. Publication number: 100850349 , February 2019 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SeaTools is either a trademark or registered trademark of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries.
Contents Introduction Warranty Preparing for Installation Required Tools Installing the SSD SeaTools DiscWizard Seagate Technology Support Services Seagate BarraCuda 510 Installation Guide, Rev.
Introduction This document describes how to install the Seagate® BarraCuda® 510 SSD on your computer. The Seagate BarraCuda 510 SSD is a versatile NVMe SSD that is optimized for maximum storage capacity with a wide range of application utilities. It is up to 6x faster than SATA SSDs and has TCG security to keep data safe and secure. See the SSD product documentation for warranty and more details. The BarraCuda 510 SSD comes in the M.
Installing the SSD 1. 2. 3. 4. 5. 6. 7. Open the case or cabinet. Remove the existing storage devices if any. Power on your computer. Access the BIOS setup while the computer is booting. Usually, the computer screen displays the keys to be pressed to access the BIOS setup during the boot process. See the computer or motherboard documentation for information on how to access the BIOS. Ensure that a PCIe device is set in the BIOS boot sequence or boot priority list.
8. Insert the BarraCuda 510 SSD with the pinside going into the M.2 slot and the label side facing the top at a 30 degree angle. Figure 3: Seagate M.2 SSD in the M.2 Slot 9. Press the SSD down and mount it above the screw slot of the motherboard and fasten the screws. 10. Close the case or cabinet and reassemble your computer. 11. Power on your computer. 12. Start installing the Operating System on the BarraCuda 510 SSD if you want to use it as the primary drive.
SeaTools SeaTools™ is a free software from Seagate that tests and analyses drives. It is completely data safe and easily installs on your system. You can use SeaTools in your BarraCuda 510 SSD for: ● ● ● Health Monitoring Drive Maintenance Overall Monitoring More information and SeaTools documentation are available at: https://www.seagate.com/in/en/support/downloads/seatools DiscWizard Seagate DiscWizard is an integrated software suite that ensures the security of all of the information on your PC.
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 90 Woodlands Avenue 7, Singapore 737911, 65-6412-3666 EUROPE, MIDDLE EAST, AND AFRICA Seagate Technology (Netherlands) B.V. Koolhovenlaan 1, 1119 NB Schiphol-Rijk, Netherlands, 31-20-316-7300 Publication Number: 100850349 February 2019 Seagate BarraCuda 510 Installation Guide, Rev.
