Product manual

2 Constellation ES.2 SAS Product Manual, Rev. G

2.0 Scope

This manual describes Seagate Technology

LLC, Constellation

ES.2 SAS (Serial Attached SCSI) disk

drives.

Constellation ES.2 drives support the SAS Protocol specifications to the extent described in this manual. The

SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other

Seagate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the

interface, general operation, and security features available on Self-Encrypting Drive models.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data

listed in this manual may not be predictive of future generation specifications or requirements. If you are

designing a system which will use one of the models listed or future generation products and need further

assistance, please contact your Field Applications Engineer (FAE) or our global support services group as

shown in Section 1.0.

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption

(FDE) models before a differentiation between drive-based encryption and other forms of encryp-

tion was necessary.

Note. The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for

“Security of Data at Rest” based on the standards defined by the Trusted Computing Group (see

www.trustedcomputinggroup.org).

For more information on FIPS 140-2 Level 2 certification see Section 8.0 on page 38.

Model Number Self-Encrypting Drive (SED) FIPS 140-2 Level 2

ST33000650SS No No

ST33000651SS Yes No

ST33000652SS Yes Yes

ST32000645SS No No

ST32000646SS Yes No

ST32000647SS Yes Yes