User Manual

Seagate Enterprise Capacity 2.5 HDD v3 SAS Product Manual, Rev. E 45
11.3.1 Inquiry data
The table below lists the Inquiry command data that the drive should return to the initiator per the format given in the SAS Interface Manual.
Table 8 Enterprise Capacity 2.5 HDD v3 inquiry data
* Copyright year (changes with actual year).
** SCSI Revision support. See the appropriate SPC release documentation for definitions.
PP 10 = Inquiry data for an Inquiry command received on Port A.
30 = Inquiry data for an Inquiry command received on Port B.
R# Four ASCII digits representing the last four digits of the product firmware release number.
S# Eight ASCII digits representing the eight digits of the product serial number.
[ ] Bytes 16 through 26 reflect model of drive. The table above shows the hex values for Model ST2000NX0263.
Refer to the values below for the values of bytes 16 through 26 of a particular model:
ST2000NX0273 5354323030304E5830323733
ST2000NX0323 5354323030304E5830333233
ST2000NX0333 5354323030304E5830333333
ST2000NX0343 5354323030304E5830333433
ST2000NX0353 5354323030304E5830333533
ST2000NX0433 5354323030304E5830343333
ST1000NX0323 5354313030304E5830333233
ST1000NX0333 5354313030304E5830333333
ST1000NX0363 5354313030304E5830333633
ST1000NX0373 5354313030304E5830333733
ST1000NX0453 5354313030304E5830343533
Bytes Data (hex)
0-15 00 00 xx** 12 8B 01 PP 02 53 45 41 47 41 54 45 20 Vendor ID
16-31 [53 54 32 30 30 30 4E 58 30 32 36 33] 20 20 20 20 Product ID
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
48-63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
64-79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80-95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96-111 00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 32* *Copyright
112-127 30* 31* 34* 20 53 65 61 67 61 74 65 20 41 6C 6C 20 notice
128-143 72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20