User Manual

Constellation ES.3 SAS Product Manual, Rev. F 6
1.0 Scope
This manual describes Seagate® LLC, Constellation
®
ES.3 SAS (Serial Attached SCSI) disk drives.
Constellation ES.3 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual
(part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive
Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-
Encrypting Drive models.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual
may not be predictive of future generation specifications or requirements. If users are designing a system which will use one of the
models listed or future generation products and need further assistance, please contact the Field Applications Engineer (FAE) or our
global support services group as shown in See “Seagate® Technology Support Services” on page 5.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
.
For more information on FIPS 140-2 Level 2 certification see Section 7.0 on page 43.
Standard models
Self-Encrypting Drive
(SED)
FIPS 140-2 Level 2
(Review Pending)
ST4000NM0023 ST4000NM0043 ST4000NM0063
ST3000NM0023 ST3000NM0043 ST3000NM0063
ST2000NM0023 ST2000NM0043 ST2000NM0063
ST1000NM0023 ST1000NM0043 ST1000NM0063
Note
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models
before a differentiation between drive-based encryption and other forms of encryption was necessary.
Note
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions
for “Security of Data at Rest” based on the standards defined by the Trusted Computing Group
(see www.trustedcomputin
ggroup.org).