User Manual

Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. C 27
63 Multiword DMA active and modes supported (see note following this table) x407
H
64 Advanced PIO modes supported (modes 3 and 4 supported) 0003
H
65 Minimum multiword DMA transfer cycle time per word (120 ns) 0078
H
66 Recommended multiword DMA transfer cycle time per word (120 ns) 0078
H
67 Minimum PIO cycle time without IORDY flow control (240 ns) 0078
H
68 Minimum PIO cycle time with IORDY flow control (120 ns) 0078
H
69 Additional supported 0008
H
70–74 ATA-reserved 0000
H
75 Queue depth 001F
H
76 Serial ATA capabilities 850E
H
77 Serial ATA Additional Capabilities 004x
H
78 Serial ATA features supported 08CC
H
79 Serial ATA features enabled 0040
H
80 Major version number 07F0
H
81 Minor version number 0000
H
82 Command sets supported 346B
H
83 Command sets supported 7D09
H
84 Command sets support extension (see note following this table)
4163
H
85 Command sets enabled 3469
H
86 Command sets enabled BC01
H
87 Command sets enable extension 4163
H
88 Ultra DMA support and current mode (see note following this table) xx7F
H
89 Security erase time xx37
H
90 Enhanced security erase time xx37
H
92 Master password revision code FFFE
H
93 Hardware reset value xxxx
H
95 ATA-reserved 1000
H
96–97 ATA-reserved 0000
H
98–99 ATA-reserved 0000-2710
H
100–103
Total number of user-addressable LBA sectors available
(see Section 2.2 for related information). These words are required for drives that
support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
ST2000NM0008 = 3,907,029,168
ST2000NM0018 = 3,907,029,168
ST1000NM0008 = 1,953,525,168
ST1000NM0018 = 1,953,525,168
104–105 ATA-reserved 0000
H
106 Physical/Logical sector size 4000
H
107 ATA-reserved 0000
H
108–111 The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have a
unique value.
112–118 ATA-reserved 0000
H
119 Commands and feature sets supported 405C
H
120 Commands and feature sets supported or enabled 401C
H
Table 9 Identify Device commands
Word Description Value