User Manual

SCSI Commands Reference Manual, Rev. J 63
www.seagate.com General Concepts
2A 03 Reservations preempted 6
2A 04 Reservations Released 6
2A 05 Registrations Preempted 6
2C 00 Command Sequence Error 5
2F 00 Tagged Commands Cleared By Another Initiator 6
31 00 Medium Format Corrupted 3
31 01 Corruption in R/W format request 3
31 91 Corrupt World Wide Name (WWN) in drive information file 3
32 00 No Defect Spare Location Available 4
32 01 Defect List Update Error 3, 4, 5
32 02 No Spares Available—Too Many Defects On One Track
32 03 Defect list longer than allocated memory 3
33 00 Flash not ready for access 3
35 00 Unspecified Enclosure Services Failure 4
35 01 Unsupported Enclosure Function 5
35 02 Enclosure Services Unavailable 2
35 03 Enclosure Transfer Failure 4
35 04 Enclosure Transfer Refused 4
37 00 Parameter Rounded 1
3D 00 Invalid Bits In Identify Message
3E 03 Logical Unit Failed Self Test 4
3E 00 Logical Unit Has Not Self Configured Yet
3F 00 Target Operating Conditions Have Changed 6
3F 01 Device internal reset occurred 6
3F 02 Changed Operating Definition 6
3F 05 Device Identifier Changed 6
3F 0F Echo buffer overwritten B
3F 80 Buffer contents have changed 1
3F 90 Invalid APM Parameters
3F 91 World Wide Name (WWN) Mismatch 6
40 01 DRAM Parity Error 1, 4
40 02 Spinup Error recovered with retries 1
42 00 Power-On Or Self-Test Failure 4
42 0A Port A failed loopback test 4
42 0B Port B failed loopback test 4
43 00 Message Reject Error B
44 00 Internal Target Failure 1, 3, 4
44 F2 Data Integrity Check Failed on verify 4
44 F6 Data Integrity Check Failed during write 4
44 FF XOR CDB check error 4
Table 29 Additional Sense and Additional Sense Qualifier codes
ASC (byte
12)
ASCQ (byte
13)
Description Sense
Key