User Manual

SCSI Commands Reference Manual, Rev. J 514
Index
Direct access block commands 65
Disable Discovery
Fibre Channel Interface Control page
435, 436, 437
Disable Loop Master
Fibre Channel Interface Control page
435, 437
Disable Page Out bit 139
Disable Prefetch Transfer Length
Caching Parameters page
392
Disable Soft Address
Fibre Channel Interface Control page
435, 437
Disable Target Fabric Discovery
Fibre Channel Interface Control page
435, 436
Disable Target Initiated Port Enable
Fibre Channel Interface Control page
435, 437
Disable Target Oriented Loop Initialization
Fibre Channel Interface Control page
435, 437
Disabled Physical Element
Translate Address page 299, 300
Disabled Physical Element Mask
Translate Address page 299, 300
DLM. See Disable Loop Master
DPO
See Disable Page Out bit
136, 139
DSA. See Disable Soft Address
DTFD. See Disable Target Fabric Discovery
DTIPE. See Disable Target Initiated Port Enable
DTOLI. See Disable Target Oriented Loop Initialization
E
EN_BMS
Enable Background Medium Scan
389
Enable Vital Product Data bit 92
Error Code
Diagnostic Data Bytes
171
Error code
definition
170
ETF Log Date Code page 481
ETF Log field 481
EVPD. See Enable Vital Product Data bit
Extended bytes from index address descriptor
82
Extended INQUIRY Data 483
Extended INQUIRY Data VPD page (86h) 483
Extended physical sector address descriptor 83
extended sense
codes
60
F
Factory Log page 330
Factory log page 330
Fibre Channel Logical Unit Control mode page 433
field
maximum-value
45
minimum-value 45
Field Replaceable Unit
Diagnostic Data Bytes
171
Field replaceable unit 170
Firmware Numbers 488
Fixed length CDBs 38
CDB for 10-byte commands 38
CDB for 12-byte commands 39
CDB for 6-byte commands 38
CDB for long LBA 16-byte commands 39
Format parameters
page
410
FORMAT UNIT command 71
FORMAT UNIT parameter list 75
FRU. see Field Replaceable Unit
FUA
See Force unit access bit
136
G
GROUP NUMBER field 139
Grouping function 44
I
Identification Descriptor 491
illegal request sense key 45
Information
Response codes 70h and 71h sense data format
57
Informational Exceptions Control mode page (1Ch) 415
INQUIRY command 92
J
Jumper Settings 495
Jumper settings page 495
K
Keywords 35
L
Log parameters 302
LOG SELECT command 101
LOG SENSE command 106
Logical block address 43
LOGICAL BLOCK ADDRESS field 139
LOGICAL BLOCK LENGTH
Mode Parameter Block Descriptor
382
Logical Block Provisioning 497
LUN LIST LENGTH field 180
M
maximum-value field 45
Medium Scan Parameter 315
minimum-value field 45
Mode Page Policy 500
Mode page policy 108
Mode parameter block descriptor formats 380
Mode parameter header 378