User Manual

SCSI Commands Reference Manual, Rev. J 349
www.seagate.com Parameters for direct access devices
5.2.15.2 Pending Defect Count log parameter
The Pending Defect Count log parameter has the format defined in table 328 and indicates the number of Pending Defect log
parameters that are available.
PARAMETER CODE field
The PARAMETER CODE field is described in 5.2.2.2.2 and shall be set as defined in table 328 for the Pending Defect Count log parameter.
PARAMETER LIST LENGTH field
The PARAMETER LIST LENGTH field is described in 5.2.2.2.1 and shall be set to the value defined in table 328 for the Pending Defect Count log
parameter.
PENDING DEFECT COUNT field
The PENDING DEFECT COUNT field indicates the number of Pending Defect log parameters that are available. The PENDING DEFECT COUNT
field changes whenever the number of Pending Defect log parameters (see 5.2.15.3) changes.
Table 328 Pending Defect Count log parameter format
Bit
Byte
7 6 5 4 3 2 1 0
0
(MSB)
PARAMETER CODE (0000h)
1
(LSB)
2
PARAMETER CONTROL BYTE – binary format list log parameter (see 5.2.2.2.2.5)
3
PARAMETER LENGTH (04h)
4
(MSB)
PENDING DEFECT COUNT
. . .
n
(LSB)