User Manual

SCSI Commands Reference Manual, Rev. J 343
www.seagate.com Parameters for direct access devices
5.2.13.5 De-duplicated LBA Resource Count log parameter
The De-duplicated LBA Resource Count log parameter of the Logical Block Provisioning log page (see table 320) contains
information about de-duplicated LBA resources.
PARAMETER CODE field
The PARAMETER CODE field is described in 5.2.2.2.1 and shall be as shown in table 320 for the De-duplicated LBA Resource Count log parame-
ters.
PARAMETER LENGTH field
The PARAMETER LENGTH field is described in 5.2.2.2.1 and shall be set as shown in table 320 for the De-duplicated LBA Resource Count log
parameters.
RESOURCE COUNT field
The RESOURCE COUNT field indicates an estimate of the number of LBA resources made available as a result of de-duplication and is defined in
5.2.13.4.2.
SCOPE field
The SCOPE field indicates the scope to which the RESOURCE COUNT field applies and is defined in table 316.
Table 320 De-duplicated LBA Resource Count log parameter format
Bit
Byte
7 6 5 4 3 2 1 0
0
(MSB)
PARAMETER CODE (0100h)
1
(LSB)
2
PARAMETER CONTROL BYTE – binary format list log parameter (see 5.2.2.2.2.5)
3
PARAMETER LENGTH (08h)
4
(MSB)
RESOURCE COUNT
. . .
7
(LSB)
8
Reserved SCOPE
9
Reserved
. . .
11