User Manual

SCSI Commands Reference Manual, Rev. J 326
www.seagate.com Parameters for direct access devices
5.2.8.3 Relative Humidity Report log parameter
The Relative Humidity Report log parameter has the format shown in table 297.
PARAMETER CODE field
The PARAMETER CODE field is described in 5.2.2.2.1 and shall be as shown in table 294 for the Relative Humidity Report log parameters.
PARAMETER LENGTH field
The PARAMETER LENGTH field is described in 5.2.2.2.1 and shall be set as shown in table 297 for the Relative Humidity Report log parameters.
The relative humidity limit values used in the Relative Humidity Limits log parameters are shown in table 298.
Table 297 Relative Humidity Report log parameter
Bit
Byte
7 6 5 4 3 2 1 0
0 (MSB)
PARAMETER CODE (see table 289)
1 (LSB)
2 PARAMETER CONTROL BYTE – binary format list log parameter (see 5.2.2.2.2.5)
3 PARAMETER LENGTH (08h)
4 Reserved
5 RELATIVE HUMIDITY
6 LIFETIME MAXIMUM RELATIVE HUMIDITY
7 LIFETIME MINIMUM RELATIVE HUMIDITY
8 MAXIMUM RELATIVE HUMIDITY SINCE POWER ON
9 MINIMUM RELATIVE HUMIDITY SINCE POWER ON
10
Reserved
11
Table 298 Relative humidity reporting values
Value Description
0 to 100
Relative humidity
101 to 254
Reserved
255
No valid relative humidity