User Manual

SCSI Commands Reference Manual, Rev. J 287
www.seagate.com Zone Block Commands (ZBC)
REPORTING OPTIONS field
The REPORTING OPTIONS field (see table 247) specifies the information to be returned in the parameter data.
CONTROL byte
The CONTROL byte is defined in 2.2.7.
Table 247 REPORT ZONES REPORTING OPTIONS field
Code Description
00h List all of the zones in the zoned block device.
01h List the zones with a Zone Condition of EMPTY.
02h List the zones with a Zone Condition of IMPLICITLY OPENED.
03h List the zones with a Zone Condition of EXPLICITLY OPENED.
04h List the zones with a Zone Condition of CLOSED.
05h List the zones with a Zone Condition of FULL.
06h List the zones with a Zone Condition of READ ONLY.
07h List the zones with a Zone Condition of OFFLINE.
08h to 0Fh Reserved
10h List of the zones with RWP Recommended set to true.
11h List of the zones with Non-Sequential Write Resources Active set to true.
12h to 3Eh Reserved
3Fh List of the zones with a Zone Condition of NOT WRITE POINTER.