User Manual

SCSI Commands Reference Manual, Rev. J 193
www.seagate.com Direct Access Block commands (SPC-5 and SBC-4)
3.36 REPORT TIMESTAMP command
The REPORT TIMESTAMP command (see table 162) requests the device server to return the current value of a device clock (see
SPC-5). This command uses the MAINTENANCE IN CDB format (see SPC-5).
OPERATION CODE field
The OPERATION CODE field shall be set as shown in table 162 for the REPORT TIMESTAMP command.
SERVICE ACTION field
The SERVICE ACTION field shall be set as shown in table 162 for the REPORT TIMESTAMP command.
ALLOCATION LENGTH field
The ALLOCATION LENGTH field is defined in 2.2.6.
CONTROL byte
The CONTROL byte is defined in Clause 2.2.7.
Table 162 REPORT TIMESTAMP command
Bit
Byte
7 6 5 4 3 2 1 0
0 OPERATION CODE (A3h)
1 Reserved SERVICE ACTION (0Fh)
2
Reserved. . .
5
6 (MSB)
ALLOCATION LENGTH. . .
9 (LSB)
10 Reserved
11 CONTROL