User Manual

Seagate Enterprise Capacity 3.5 HDD v5 Serial ATA Product Manual, Rev. C 8
2.2 Formatted capacity
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.2.1 LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of
guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support
of drives with capacities over 137GB.
2.3 Recording and interface technology
2.4 Start/stop times
ST models
Formatted
capacity*
Guaranteed sectors Bytes per logical sector
ST6000NM0235 6TB 11,721,045,168 512
Interface Serial ATA (SATA)
Recording method Perpendicular
Recording density, KBPI (Kb/in max) 2226
Track density, KTPI (ktracks/in avg) 375
Areal density (Gb/in
2
avg) 802
Spindle speed (RPM) (± 0.2%) 7200
Internal data transfer rate (Mb/s max) 2546
Maximum Sustained data transfer rate (MiB/s) 205
I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5)
Power-on to Ready (sec) (typ/max) 23/30
Standby to Ready (sec) (typ/max) 23/30
Ready to spindle stop (sec) (max) 23