User Manual

Seagate Enterprise Capacity 3.5 HDD v5 SAS Product Manual, Rev. H 50
11.3.1 Inquiry data
Table 8 lists the Inquiry command data that the drive should return to the initiator per the format given in the SAS Interface Manual.
Table 8 Enterprise Capacity 3.5 HDD v5 inquiry data
* Copyright year (changes with actual year).
** SCSI Revision support. See the appropriate SPC release documentation for definitions.
PP 10 = Inquiry data for an Inquiry command received on Port A.
30 = Inquiry data for an Inquiry command received on Port B.
R# Four ASCII digits representing the last four digits of the product firmware release number.
S# Eight ASCII digits representing the eight digits of the product serial number.
[ ] Bytes 16 through 26 reflect model of drive. The table above shows the hex values for Model ST8000NM0065.
Refer to the values below for the values of bytes 16 through 26 of a particular model:
ST8000NM0075 53 54 38 30 30 30 4E 4D 30 30 37 35
ST8000NM0085 53 54 38 30 30 30 4E 4D 30 30 38 35
ST8000NM0095 53 54 38 30 30 30 4E 4D 30 30 39 35
ST8000NM0125 53 54 38 30 30 30 4E 4D 30 31 32 35
ST8000NM0135 53 54 38 30 30 30 4E 4D 30 31 33 35
ST8000NM0175 53 54 38 30 30 30 4E 4D 30 31 37 35
ST6000NM0075 53 54 36 30 30 30 4E 4D 30 30 37 35
ST6000NM0085 53 54 36 30 30 30 4E 4D 30 30 38 35
ST6000NM0135 53 54 36 30 30 30 4E 4D 30 31 33 35
ST6000NM0145 53 54 36 30 30 30 4E 4D 30 31 34 35
Bytes Data (hex)
0-15 00 00 xx** 12 8B 00 30 02 53 45 41 47 41 54 45 20 Vendor ID
16-31 [53 54 38 30 30 30 4E 4D 30 30 36 35} 20 20 20 20 Product ID
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
48-63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
64-79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80-95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96-111 00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 32* *Copyright
112-127 30* 31* 36* 20 53 65 61 67 61 74 65 20 41 6C 6C 20 notice
128-143 72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20